Note: With this solution, the volume for both CD audio and MPEG audio will be controlled by the CD Audio portion of your mixer.
#Real magic em8300 pro#
If you are using this solution, attach the Pro Logic receiver to the Line Out port of your sound card to obtain the surround sound signal. This solution eliminates the external audio cable that normally goes from the DVD/MPEG-2 Playback Card to your sound card. The signal from the Line Out port combines the CD Audio In signal from the DVD-ROM drive with the same signal that is output through the Stereo Output Port on the REALmagic Hollywood Plus. Please refer to Figure 1 for the locations of these internal connectors.
#Real magic em8300 plus#
To do this, attach the CD audio cable from the DVD-ROM drive to the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card, then attach another cable from the internal Line Out port from the REALmagic Hollywood Plus to the CD Audio In connector on your sound card. The DVD/MPEG-2 Playback Card also includes an internal CD Audio In connector that allows you to pass CD audio through to the internal CD Audio In connector on your sound card. The S-Video connector provides better picture quality. If your television set does not have an S-Video input port, you may connect it the the REALmagic Hollywood Plus by using an S-Video to Composite converter cable.Ĭomposite Video is more common and works with most televisions.
#Real magic em8300 tv#
The S-Video TV Out connector on the REALmagic Hollywood Plus is a 7-pin S-Video connector, which can be connected directly to a TV using a standard S-Video cable.
The REALmagic Hollywood Plus DVD/MPEG-2 Playback card can be connected directly to a TV using an S-Video cable. There are two options for connecting your REALmagic Hollywood Plus DVD/MPEG-2 Playback Cad to a television: S-Video by using a standard S-Video cable, or composite video by using an S-Video to Composite converter cable. This signal contains all six Dolby Digital Surround Sound channels. Connect your Dolby Digital Surround Sound receiver to the S/PDIF connector. Otherwise, attach this signal directly to a Pro Logic receiver or speakers. A standard mini jack audio cable can be used for this audio connection of the DVD/MPEG-2 Playback Card and the sound card.
It will also allow you to control the volume by using the mixer program provided with your sound card. This will allow you to use one set of speakers to listens to both DVD/MPEG-2 audio as well as other types of audio from your sound card.
If your system has a sound card, we recommend attaching the Stereo Output signal to the LINE-IN port on your sound card, and then attach your Pro Logic receiver or speakers to the LINE-OUT or SPEAKER port on your sound card. It also contains the Pro Logic Surround Sound encoding that allows you to achieve surround sound by attaching this signal to a Pro Logic receiver. The Stereo Out outputs a standard analog stereo signal that can be used by virtually any stereo receivers or amplified speakers. There are two audio outputs on the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card: the Stereo Out and the S/PDIF connector. Connect the VGA cable from your VGA monitor to the VGA OUT of the DVD/MPEG-2 Playback Card. Attach the other end (15-pin "D" shape) of the cable to the output port on your VGA card or your PC's VGA output port.ģ. Attach the round 9-pin DIN connector of the provided External VGA Pass-Through Cable to the VGA IN connector at the back of the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card (refer to Figure 1).Ģ. (Refer to Figure 1 earlier in this Chapter for reference.) Follow the steps to connect the DVD/MPEG-2 Playback Card to your VGA output (see Figure 2).ġ. Your REALmagic Hollywood Plus DVD/MPEG-2 Playback Card must be connected to your VGA card or your PC's VGA output port in order to display MPEG video on your VGA monitor. This will not affect the audio of DVD-Video or DVD-ROM titles. Otherwise, you will not be able to play CD-Audio titles with the DVD-ROM drive. Note: If you are installing a DVD-ROM drive at the same time as the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card, remember to attach the CD-Audio cable from the DVD-ROM drive to your sound card. Here's a brief excerpt from the installation manual: Note: If you are installing a DVD-ROM drive at the same time as the REALmagic Hollywood Plus DVD/MPEG-2 Playback Card, remember I've a REALmagic Hollywood Plus DVD/MPEG-2 Playback card.
0 kommentar(er)
